How To Choose Suitable Block Making Machine According To Output, Budget & Raw Material | Hongfa Machinery

 Many new investors feel confused when picking block making machine. The proper equipment is decided by 4 core factors: target daily output, available factory space, investment budget and raw material type (mine tailings, fly ash, stone powder, sand).

Hongfa sorts all block making machines into 3 series for different project scales, helping you quickly lock the most cost-effective production line without overspending or insufficient capacity.

Choose Machine Based On Daily Output

1. Daily output below 15,000 standard bricks → QT4-15S small economical block making machine
Suitable for small mines, township brick yards, startup investors with low demand, stable output of 10,000–12,000 blocks per day.

2. Daily output 18,000–30,000 standard bricks → QT6-15 medium automatic block making machine
For medium brick factories and stable municipal material suppliers, full automatic batching & stacking, higher forming efficiency.

3. Daily output over 30,000 standard bricks → Large static pressure full automatic block production line
Matching vertical curing rack & finger car, 24h unmanned production, built for large mining groups and big construction material manufacturers.

Choose Machine Based On Investment Budget

1. Limited budget, first-time investment → QT4-15S simple automatic block making line
Low initial cost, modular structure, natural single-layer curing without expensive vertical curing system, the most popular choice for overseas small investors.

2. Medium budget, pursue stable long-term production → QT6-15 full automatic block line
Equipped with air source heat pump curing room, less labor consumption, low daily operation cost, balanced input and profit.

3. Sufficient budget, pursue intelligent high-yield factory → Large static pressure intelligent block production line
Full closed dust removal, remote IoT monitoring, multi-layer vertical curing system, maximize waste disposal capacity and factory profit.

Choose Machine Based On Raw Material

1. Main raw material: Mine tailings, fly ash, limestone powder (high solid waste mixing ratio)
All 3 series block making machines support tailings recycling, QT4-15S with JS500 mixer for small waste consumption; QT6-15 & static pressure lines equip JS1000 twin-shaft mixer for high proportion fine powder mixing, max tailings mixing ratio up to 70%.

2. Main raw material: Natural sand & gravel, low waste usage
QT4-15S and QT6-15 can fully meet production demand, simple mixing equipment is enough for coarse aggregate.

3. Need to produce colored pavers, slope protection blocks
All models support fast mold replacement within 30 minutes, medium and large lines equip independent face material mixing system for high-quality pavement bricks.

Choose Machine Based On Factory Land Area

1. Small workshop, narrow site → QT4-15S simple block making line
Compact layout, no large vertical curing rack required, save over 50% workshop space, adapt to small mine warehouses and idle township workshops.

2. Standard size factory, enough flat ground → QT6-15 full automatic line
Match independent curing room, orderly layout of batching, mixing, forming and stacking area.

3. Large standardized industrial plant → Static pressure intelligent vertical curing production line
Install multi-layer finger car curing rack, save 60% ground space to achieve higher output within same workshop area.

 Quick Model Matching Checklist

Professional Customized Suggestion

If you cannot confirm which block making machine fits your project, send us your basic information below, our engineering team will provide free targeted solution and quotation:
1. Target daily block output
2. Main raw material (mine tailings / fly ash / sand)
3. Available length & width of factory workshop
4. Local climate (tropical / cold zone)
5. Total investment budget range
We also supply free factory layout drawing, exclusive solid waste brick formula and overseas engineer installation service for all block making machine orders.

Get Free Block Making Machine Selection Scheme Now
Fill in your project information, we will match the most suitable block production line for you within 24 hours.