The whole simple block production line is equipped with an integrated PLC intelligent central control system, all linked equipment runs coordinately. The full process including automatic raw material batching, forced mixing, host molding, wet block conveying and finished block automatic stacking operates unattended. Traditional semi-automatic brick lines require at least 8 to 10 workers to feed materials, distribute raw materials, discharge blocks and carry finished products separately, while this simple fully automatic line only needs 2 to 3 staff for daily inspection, raw material replenishment and finished product transfer, greatly cutting long-term expenses on labor wages, accommodation and management. The visual touch screen operation panel is simple and user-friendly, supporting manual debugging, single-cycle trial production and continuous mass production modes. Workers without professional experience can operate independently after short training, completely solving the industry pain points of labor shortage and rising labor costs in overseas and remote areas.
The production line boasts strong raw material adaptability, which can fully consume mine tailings, fly ash, smelting slag, stone dust and other mine solid waste, with the maximum tailings mixing ratio reaching 70%, largely replacing high-priced cement and natural sandstone aggregates. Mine tailings are waste residues from mining with low purchasing cost, and some mining areas even provide tailings for free. It can solve multiple problems such as land occupation by piled tailings, environmental penalties and hidden dangers of tailings ponds, realizing green resource utilization of mine waste, and drastically reduce the total raw material procurement cost of brick plants. The complete mixing and batching system is optimized for fine tailings powder to prevent blockage and ensure uniform mixing. The compactness of formed green blocks meets standards, and the compressive strength, frost resistance and anti-permeability of finished bricks fully satisfy national standards for construction and municipal projects, balancing environmental compliance and factory profit growth.
The core molding host of the line is QT4-15S automatic block machine with standardized fast mold changing structure. The whole mold replacement process can be finished within 30 minutes, without disassembling or modifying the main frame and hydraulic components, and no large professional tools are needed. After replacing molds, users can freely switch to produce standard solid cement bricks, load-bearing hollow blocks, colored pavement pavers and water-permeable bricks, and custom special-shaped building materials such as curb stones and river slope protection bricks are available on demand. One single production line can undertake multiple engineering orders including civil housing construction, workshop masonry, urban road and park landscape projects simultaneously. No extra brick machines or extra production space are required, reducing equipment investment and workshop rental cost, flexibly coping with fluctuating order types and improving the order competitiveness of brick plants.
The whole simple automatic block production line adopts modular split layout. Batching silos, mixing host, molding machine, stacking equipment and conveying system are separated independently and flexibly connected by belt conveyors. The placement sequence and spacing can be adjusted freely according to the length, width, gate direction and height difference of customers’ workshops, without large-scale excavation or workshop expansion, which can be put into production directly for both new and old brick plants. The overall floor space of the complete set is much smaller than large fully automatic solid waste brick lines, suitable for small private brick plants and supporting building material processing factories in mining areas with limited space. All units can be split separately for transportation and easily loaded into containers, greatly cutting cross-border logistics cost, perfectly matching the factory construction demands of small brick plant clients in Africa, Southeast Asia, Middle East and other regions.
The whole machine frame is welded with thickened high-strength carbon steel, anti-vibration and deformation-resistant, suitable for 24-hour non-stop continuous mass production. Core hydraulic oil pumps, solenoid valves, vibration motors and PLC electrical components adopt top-tier brand accessories. All equipment undergoes 72-hour no-load & load continuous test before delivery, resulting in extremely low factory failure rate. The mechanical structure of the whole line is concise and intuitive, with centralized exposed lubrication points and wearing parts for convenient daily inspection and repair. Consumable parts such as vibration rubber blocks, conveyor chains and molds are standardized and universal with simple replacement procedures, no long-term on-site maintenance by professional engineers required. Complete maintenance manuals are provided by the manufacturer, with graded maintenance procedures marked for each shift, weekly and monthly inspection. Simple routine maintenance can extend the service life of the whole line, reduce production loss caused by shutdown maintenance, and guarantee stable and continuous supply of finished bricks for factories.
The whole simple block production line is equipped with an integrated PLC intelligent central control system, all linked equipment runs coordinately. The full process including automatic raw material batching, forced mixing, host molding, wet block conveying and finished block automatic stacking operates unattended. Traditional semi-automatic brick lines require at least 8 to 10 workers to feed materials, distribute raw materials, discharge blocks and carry finished products separately, while this simple fully automatic line only needs 2 to 3 staff for daily inspection, raw material replenishment and finished product transfer, greatly cutting long-term expenses on labor wages, accommodation and management. The visual touch screen operation panel is simple and user-friendly, supporting manual debugging, single-cycle trial production and continuous mass production modes. Workers without professional experience can operate independently after short training, completely solving the industry pain points of labor shortage and rising labor costs in overseas and remote areas.
The production line boasts strong raw material adaptability, which can fully consume mine tailings, fly ash, smelting slag, stone dust and other mine solid waste, with the maximum tailings mixing ratio reaching 70%, largely replacing high-priced cement and natural sandstone aggregates. Mine tailings are waste residues from mining with low purchasing cost, and some mining areas even provide tailings for free. It can solve multiple problems such as land occupation by piled tailings, environmental penalties and hidden dangers of tailings ponds, realizing green resource utilization of mine waste, and drastically reduce the total raw material procurement cost of brick plants. The complete mixing and batching system is optimized for fine tailings powder to prevent blockage and ensure uniform mixing. The compactness of formed green blocks meets standards, and the compressive strength, frost resistance and anti-permeability of finished bricks fully satisfy national standards for construction and municipal projects, balancing environmental compliance and factory profit growth.
The core molding host of the line is QT4-15S automatic block machine with standardized fast mold changing structure. The whole mold replacement process can be finished within 30 minutes, without disassembling or modifying the main frame and hydraulic components, and no large professional tools are needed. After replacing molds, users can freely switch to produce standard solid cement bricks, load-bearing hollow blocks, colored pavement pavers and water-permeable bricks, and custom special-shaped building materials such as curb stones and river slope protection bricks are available on demand. One single production line can undertake multiple engineering orders including civil housing construction, workshop masonry, urban road and park landscape projects simultaneously. No extra brick machines or extra production space are required, reducing equipment investment and workshop rental cost, flexibly coping with fluctuating order types and improving the order competitiveness of brick plants.
The whole simple automatic block production line adopts modular split layout. Batching silos, mixing host, molding machine, stacking equipment and conveying system are separated independently and flexibly connected by belt conveyors. The placement sequence and spacing can be adjusted freely according to the length, width, gate direction and height difference of customers’ workshops, without large-scale excavation or workshop expansion, which can be put into production directly for both new and old brick plants. The overall floor space of the complete set is much smaller than large fully automatic solid waste brick lines, suitable for small private brick plants and supporting building material processing factories in mining areas with limited space. All units can be split separately for transportation and easily loaded into containers, greatly cutting cross-border logistics cost, perfectly matching the factory construction demands of small brick plant clients in Africa, Southeast Asia, Middle East and other regions.
The whole machine frame is welded with thickened high-strength carbon steel, anti-vibration and deformation-resistant, suitable for 24-hour non-stop continuous mass production. Core hydraulic oil pumps, solenoid valves, vibration motors and PLC electrical components adopt top-tier brand accessories. All equipment undergoes 72-hour no-load & load continuous test before delivery, resulting in extremely low factory failure rate. The mechanical structure of the whole line is concise and intuitive, with centralized exposed lubrication points and wearing parts for convenient daily inspection and repair. Consumable parts such as vibration rubber blocks, conveyor chains and molds are standardized and universal with simple replacement procedures, no long-term on-site maintenance by professional engineers required. Complete maintenance manuals are provided by the manufacturer, with graded maintenance procedures marked for each shift, weekly and monthly inspection. Simple routine maintenance can extend the service life of the whole line, reduce production loss caused by shutdown maintenance, and guarantee stable and continuous supply of finished bricks for factories.
Simple Automatic Concrete Block Production Line
Hongfa Simple Automatic Concrete Block Production Line is an economical full-set brick making solution specially designed for small & medium investors. The whole line realizes full automation of automatic batching, mixing, feeding, molding, block output and automatic stacking, only 2-3 workers are required for daily mass production.The whole line features small floor space and flexible layout. It is compatible with various mine waste such as fly ash, slag and mine tailings, with the maximum tailings mixing ratio up to 70%, greatly cutting raw material cost and realizing resource utilization of mine waste, meeting global environmental production standards.Matched with QT4-15S automatic block forming host, it can produce concrete hollow blocks, standard solid bricks and colored pavement pavers by fast mold replacement. One set of line covers multi-type orders from construction, municipal and landscape projects. With low investment threshold and short payback period, it is the top factory construction solution for small brick plants in Africa, Southeast Asia and Middle East.
Simple Automatic Concrete Block Production Line
Full-line centralized PLC intelligent control, automatic batching, molding and stacking, cut 70% labor compared with semi-auto line, save long-term labor cost.
Compatible with fly ash, slag, mine tailings and other mine residues, max 70% tailings mixing ratio, replace massive cement & aggregate, realize mine waste recycling and lower material expense.
Mold change within 30 mins without host modification, switch hollow blocks, solid bricks and pavers freely, accept construction & municipal orders simultaneously, resist market fluctuation.
Modular split design, layout adjustable according to customer workshop size, no large factory reconstruction required, suitable for new plant construction & old plant renovation.
High-standard hydraulic & electrical core parts, thickened steel frame, stable 24-hour continuous production; simple structure for easy daily maintenance and quick wear parts replacement.
QT4-15S Automatic Concrete Hollow Brick Making Machine in Ghana
QT4-15S automatic concrete hollow brick making machine is popular construction machinery widely sold in Ghana. This full...
QT10-15 full automatic concrete block machine hollow brick making machinery
The entireproduction processof the QT10-15 blockforming machineisautomaticallycontrolledbyaPLC(Programmabl
Complete block production line
1.Maximumdimensionofmachine:3100*2020*2850mm2.Ratedpressure:21Pa3.MainVibrationForm:PlatformVibratio
Shandong Hongfa Scientific Industrial&Trading Co.,Ltd ©️2026Copyright © LU ICP B 16041216-4
